BSIDE-O7/O9 Handheld dual-channel oscilloscope

BSIDE-O7/ O9 Handheld dual-channel oscilloscope

Hign-concerned Chemical: None
IS Battery Demountable: No
Record Length: 128Kbyte
Model Number: O9/ O7
Certification: CE
Origin: Mainland China
Real Time Sampling Rate: 250MSa/s
Brand Name: BSIDE

Mô tả
Đánh giá (0)

BSIDE Dual Channel 50MHz Oscilloscope Multimeter Flex Coil 2000A AC/DC Voltage Capacitance Connectivity Multifunction Tester

BSIDE O9 portable oscilloscope adopts FPGA+MCU+ADC hardware architecture, dual-channel sampling rate of 280MS/s, analog bandwidth of 50Mhz, built-in high-voltage protection module, maximum support for peak voltage measurement ±400V, is a high-performance product integrating the three functions of oscilloscope, multimeter and signal transmitter.

It adopts a 3.98-inch 480*320px resolution full-view high-definition TFT display, built-in 5000mAh rechargeable lithium battery, 10 hours standby in oscilloscope mode, 24 hours in multimeter mode, and high-quality EVA handbags and other ultra-high configurations.

Can be used with a flexible current clamp. It can test the current of 2000A.

The digital multimeter mode is 6000 bits, true RMS, and supports AC/DC voltage, current, temperature, capacitance, resistance, diode, NVC, continuity and other measurement functions. Attributes such as automatic shutdown, low battery alarm, etc.

Built-in DDS function signal generator, which can output 7 kinds of function signals, the maximum output of all signals is 2MHz, and the step size is 1Hz; The output frequency, amplitude, and duty cycle are adjustable.

Product Introduction:

[Data Storage and Export]: The data of this graphic oscilloscope meter can be saved and exported to your flash drive, computer, PC, etc.

[Rechargeable]: The handheld oscilloscope multimeter comes with a rechargeable battery and charging cable, ensuring that you never have to worry about running out of power during the measurement.

[Carrying case]: The digital oscilloscope multimeter comes with a high-quality EVA carrying case, which is perfect for use on the go.

S5df8d33060b14fa3b1a44eab0a8861dfp S0a6617bd17a94fd2a938928f19db003co Sf945bd74e24c425983d1f9986cc2ccb4C S59f2b0ad58934a3ea23e36b9d87111d5o S7dd3cf5365234071bfe463537a5221a30 S8781e0eacda143c0bea046f4240f13ceX S349cac9472544db89806ad0af8e02f5av

Multimeter Function Comparison
Model	O7			O9
Function	Range	Resolution		Range		Resolution
DC Voltage(V) Accuracy	1000V 0.001V ±(0.8%+3】			1000V 0.0001V ±(0.8%+3)
DC Voltage(mV) Accuracy	600mV 0.01mV ±(1.0%+5)			200mV 0.01mV ±(1.0%+5)
AC Voltage (V) Accuracy	750V 0.001V ±(1.0%+3)			750V 0.0001V ±(1.0%+3)
AC Voltage (mV) Accuracy	600mV 0.001mV ±(1.2%+5)			200mV 0.001mV ±(1.2%+5)
DC Current(mA) Accuracy	600mA 0.01mA ±(1.0%+3)			200mA 0.01mA ±(1.0%+3）
AC Current(mA) Accuracy	600mA 0.01mA ±(1.2%+5)			200mA 0.01mA ±(1.2%+5)
AC Current(A)	6000A(Need Flexible Current Clamp) Resolution：0.1A Accuracy：±(1.0%+5)			2000A(Need Flexible Current Clamp) Resolution：0.1A Accuracy：±(1.0%+5)
Resistance Accuracy	60MΩ 0.001MΩ ±(1.2%+5)			200MΩ 0.0001MΩ ±(1.2%+5)
Capacitance Accuracy	99.99mF 0.001mF (5.0%+20）			99.999mF 0.001mF ±(5.0%+20）
Temperature	-20~1000℃ -4~1832℉ Resolution：1℃/℉ Accuracy：±(2.5%+5)			-20~1000℃ -4~1832℉ Resolution：1℃/℉ Accuracy：±(2.5%+5)
Display Value	6000 Counts			20000 Counts
Diode	√		Connectivity		√
True Virtual Value	√		Screen Backlight		√
Low Battery Reminder	√		Auto Power-off		√
Size	216.684.536mm		Weight		384g
Type Of Battery	18650 Battery 3000mA*2，6000mA Long Endurance
Screen	3.98-inch TFT full-view color screen Resolution: 480*320px

Oscilloscope technical index comparison
Character			Instructions
Bandwidth	O9:50MHz		Dual channel real-time sampling
	O7:25MHz
Sampling	Sampling mode		Real-time sampling
	Sampling rate		O9:250MSa/s O7:208MSa/s
Channel	2		Dual channel DC, AC
INPUT	Input coupling		DC/AC
	Input impedance		1MΩ,@16pf
	Probe attenuatior		×1，×10
	Maximum input voltage		X1 range <150V, X10 range<300V(DC+ Ac peak)
Horizontal	Sampling rate rang		O7 1.5Sa/s-208MSa/s	O9 1.5Sa/s-250MSa/s
	Waveform interpolation		(sinx)x
	Sweep range		100ns/div-20s/div
	Time base accuracy		20ppm
	Storage depth		128Kbyte
Vertical	Sensitivity		20mV/div-10V/div
	Displacement range		4 squares (plus or minus)
	Analog bandwidth		O7：25MHZ	O9：50MHZ
	Frequency response		＞10HZ
	Rise time		＜10ns
	DC gain accuracy		± 3 %
Measure	Automatic measurement		Period, Frequency, Peak-to-Peakvalue, Maximum value, Minimum value, Duty cycle, Root meansquare
Trigger	Trigger mode		Auto, Normal, Single
	Trigger edge		Rising edge, Falling edge
Display mode		YT, XY, RoII
Afterglow time		Minimum, 500ms, 1S, 10S, Unlimited
Waveform Type		Sine wave, Square wave,Triangular wave, Half wave,Full wave, Sawtooth wave, DC
Frequency Range		Sine wave: 0HZ-5MHZ; Square wave, triangular wave, half wave, full wave, sawtooth wave, DC: 0HZ-2MHZ
Channel		1
Output Amplitude		0.1V~3.0V
Resolution		1HZ
Square-wave Duty Cycle		1%~99%

Sb6f76ebeb0004a978c5dc4cd940bd70bp S11125c15ad3042c5b580a3accc029f735 S2d6339c98c7d4c1a8eae589eda1df532F S2ee7132d612c4c48bd9cfecab83c041dz

Oscilloscope Mode Main Screen Description
No.	Name	Instructions	No.	Name	Instructions
1	Trigger channel	CH1 is channel 1, and CH2 is channel 2	14	Vertical flip-flop	Vertical voltage position triggered
2	Running status	Status: Stop/Run	15	Horizontal trigger	Horizontal timebase position of the trigger
3	Ch1	CH1 waveform is displayed in yellow	16	CH1 Parameters	Specific parameters of CH1
4	Ch2	CH2 waveform is displayed in blue	17	CH2 Parameters	Specific parameters of CH2
5	Channel switch	CH1/CH2 On-off state	18	Voltage/Time base menu	Press up key to increase the voltage amplitude, Press down key to lower the voltage amplitude; Adjustable range: 20mV/div -10V/diy Press letf key left to enlarge the time base, Press right arrow key to reduce the time base; Adjustable range: 10ns/div-20s/div
6	Attenuation	Channel attenuation factor
7	Voltage scale	Vertical voltage scale value
8	Time base	Timebase position in storage depth
9	Time base scale	Horizontal time base scale value	19	Wave movement	Press the up/down button to adjust theupper and lower positions of the waveform, and press the left and right keys to adjustthe left and right positions of the waveform
10	Wave Mode	Auto/Normal/Single
11	Trigger mode	Rising or falling edge	20	Trigger cursor	Press the up and dow keys to adjustthe position of the trigger cursor
12	Battery level	Battery status and charging status	21	Measuring cursor	Press F4 to switch the measurement cursorselection, and press up and down arrowkeys to adjust the measurement cursor position
13	Trigger level	Trigger voltage value
Multimeter Mode
No.	Name	Instructions	No.	Name	Instructions
1	Battery level	Displays the battery status and charging status	8	Auto shutdown	Displays the time to set automatic shutdown
2	Main display	Display multimeter measurements, O7 Maximum display 6000 words, O9 Displays a maximum of 20000 characters	9	Peak mode	Press PAEK switch to peak mode(this mode is only valid for AC voltage)
3	Mode	Measurement mode
4	Range	Current mode range	10	Maximum value	Displays the maximum read value
5	Auto range	Automatic range switching	11	Minimum value	Displays the minimum read value
6	HOLD	Press SAVE key to pause the data display	12	Average value	Displays the average value
7	Mode	Display the current selected measurementmode is highlighted red.Press the left, right.up, and down arrow keys to switch gears	13	Terminal prompt	Displays the terminal to be selected for current mode
			14	Unit	Displays the unit of the measured data

S6647732f1e5d47f19c001bdef610dd8ea Sbf055f6571d24d359d332faeb3b4c3a95 S72d2b59a06fd4c2388f3a647ec50489at S4a0dc8b2b7e542af9c5e060ccdbc5838o Se7d5c06b66b84e66b241080405a65eebA S4ef312a446324c9f8e108c0a0f484bb8y Specification:

Maximum display: 20000 count screen
Size: 3.9 inches
Bandwidth: 50MHz
Real-time scanning rate: 250MSa/s
Input impedance: 1MΩ
Maximum Input Voltage: ×1 Range<150V, ×10 Range<300V (DC+AC Peak)
Horizontal seconds range: 100ns/div -20s/div
Vertical sensitivity: 20mV/div -10V/div
DC voltage: 20mV 0.001mV ± (1%+5); 200mV/2V/20V 0.01mV/0.0001V/0.001V/ ±（0.8%+3）; 200V/1000V 0.01V/0.1V ±（1%+5）
AC voltage: 20mV 0.001mV ± (1.2%+5); 200mV/2V/20V 0.01mV/0.0001V/0.001V/ ±（1%+3）; 200V 0.01V ±（1.2%+5）; 750V 0.1V ±（1.2%+5）
DC current: 20mA/200mA 0.001mA/0.01mA ±(1%+3)
AC Current: 20mA/200mA 0.001mA/0.01mA ±(1.2%+5)
Flexible Current Clamp AC Current: 200A/2000A 0.1A/1A ±(1%+5)
Resistance: 200Ω 0.01Ω ± (1.2%+5); 2K Ω/20K Ω/200K Ω 0.0001K Ω/0.001K Ω/0.01KΩ ±（1.0% + 3）; 2MΩ 0.0001MΩ ±（1.2% + 5）; 20MΩ 0.001MΩ ±（1.5% + 5）； 200MΩ 0.01MΩ ±（1.5% + 5）
Capacitance: 999.9nF 0.01 nF ± (5% + 20) 9.999 μF/999.9 μF 0.001 μF/0.01 μF ± (4.5% + 5); 99.99mF 0.001mF ±（5.0%+10）
Temperature: -20~1000°C/-4~1832°F 1°C/1°F ±(2.5% + 5)
Diode: Yes
Continuity: Yes
Power supply: 5000mA
Size: 216.6×84.5x36mm
Weight: 384g

Package includes:

1 x Handheld Oscilloscope Multimeter

1 x EVA suitcase

2 x oscilloscope probes

1 x Oscilloscope Accessory

1 x multimeter pen

1 x Crocodile Clip

1 x box

1 x charging cable

1 x Instruction Manual

1 x warranty card

1 x User Manual

Buy-this-product-on-Aliexpress

If you need reliable and high-quality laboratory equipment, look no further than Tekonlab.com. Our website is designed to provide a seamless experience, and our team of experts is always here to help. Shop with us today and experience the difference for yourself.