YR1030+/YR1035+ Battery Resistance Tester – 4-Wire, 100V, for 18650 & EV Packs

————————–YR1030/1035————————–

YR1035 battery internal resistance tester is a true four-wire internal resistance tester, which can test internal resistance and voltage value at the same time, and can also be used for resistance measurement. The measurement results are displayed on the same screen. This product is suitable for battery matching, battery performance testing, battery screening, etc. The machine has a compact structure and is easy to carry. It is your perfect electrician and electronic testing machine.

Features:

• True 4-wire AC sinusoidal measurements effectively refrain the effects of test leads and contact resistance.
• Two function interfaces, battery sorting function.
• Built-in battery, phone recharger charging, low power consumption + multiple power saving options.
• The test range is up to 200 ohms with a minimum resolution of 0.01 milliohms and less than 5 milliohms.
• Press HOLD to enable the ZR function to measure internal resistance as low as 0.30-0.50 milliohms.
• Handmade, the appearance of the right side is overly cautious.
• True four-wire 1KHz AC sinusoidal battery internal resistance meter 0.00001 ohms-200 range.
• It can measure plumbic acid, lithium ion, lithium polymer, lithium iron phosphate, alkaline, nickel hydrogen, nickel cadmium, button battery, etc.
• The ZR function measures below 5 ohms, and the internal resistance is more accurate.

Specifications:

• Material: ABS
• Color: black
• Battery: 1 * lithium battery, 2000mAh (included)
• Accuracy format: ±([accuracy percentage]+[least significant digit])
• Range: 20m Ω/200m Ω/2Ω/20Ω/200Ω
• Maximum resolution: 0.01mΩ/0.1mΩ/1mΩ/10mΩ/0.1Ω
• Accuracy: 0.7%+7/0.5%+5/0.5%+5/0.5%+5/0.6%+5
• Display mode: 22.00mΩ (when ZR function is enabled)/220.0mΩ/2.200Ω/22.00Ω/220.0Ω
• In the range of 5%-95% of the gear, when it is not within this range (less than 5% of the range of the gear range, or greater than 95% of the range of the gear range), the error may be greater than the above accuracy.
• Voltage measurement: ±(% reading +% range)
• Range: 1V/10V/100V
• Maximum resolution: 0.00001V/0.0001V/0.001V
• Accuracy: 0.15+0.015/0.15+0.010/0.15+0.015
• Display Mode: .99999V/9.9999V/99.999V
• Positive and negative symmetry error ±(0.012%+5 words)
• Temperature drift within normal use temperature (10℃-40℃) 100ppm/℃
• Maximum voltage between any terminals: 100V
• Display: internal resistance figures: 2000 counts Voltage figures: 99999 counts update 4 times per second
• Temperature: working: 10℃-40℃, storage: -20℃-60℃ internal resistance temperature coefficient: 0.1 * (prescribed accuracy)/℃ (<18℃ or >28℃)

Buy-this-product-on-Aliexpress

YR1030+/YR1035+ Battery Resistance Tester – 4-Wire, 100V, for 18650 & EV Packs

Power consumption:

• <60mA (200mΩ and above range, when the power is 3.7V, the backlight is off)
• <120mA (20mΩ range, when the power is 3.7V, the backlight is off)
• <10mA (enter low power consumption mode)
• 0mA (shutdown)
• Package size: 120*60*40mm/4.7*2.4 * 1.6in
• Package weight: 320g / 11.3ounce

Note:

The 1030 Battery Detector is a device for detecting the status of batteries, to ensure safety and accuracy, the following matters need to be noted when using it:

1.Applicable battery type:

2.Before using the 1030 Battery Detector, make sure that you understand the type of battery for which the device is intended. Different models of detectors may support different types and sizes of batteries. Make sure the detector is compatible with the battery to be tested.

3. Connect the battery correctly:

4. Ensure that the batteries are correctly connected to the detector before performing tests. Follow the connection instructions provided by the manufacturer to prevent problems that may result from incorrect connections.

5. Environmental safety:

6. When using the 1030 Battery Detector, ensure that the working environment is well ventilated. Avoid operating in humid or flammable environments to minimise possible safety risks during battery testing.

7. Read the instructions for use carefully:

8. When using the 1030 Battery Tester for the first time, read the instructions for use provided by the manufacturer in detail. Understand the meaning of the device’s various functions, buttons and indicators to ensure proper operation and correct interpretation of test results.

9. Calibrate and maintain regularly:

10.Periodically calibrate the 1030 Battery Tester to ensure the accuracy of the test results. Also, keep the equipment clean and maintained to prevent dust or dirt from affecting test performance.

Please note that the above are general precautions and specific use and maintenance guidelines may vary depending on the 030 Battery Detector model and manufacturer. Always read and follow the operating manual and safety instructions provided by the manufacturer in detail before using the equipment.

YR1030 Packing List:

1 * Tester

1 * Pair of Probes

YR1035 Set Packing List:

1 * Tester

1 * Pair of Probes

YR1030+/YR1035+ Battery Resistance Tester – 4-Wire, 100V, for 18650 & EV Packs

Buy-this-product-on-Aliexpress

Buy-this-product-on-Aliexpress

YR1030+/YR1035+ Battery Resistance Tester – 4-Wire, 100V, for 18650 & EV Packs