AGc30 Dual Sensor CO₂ Control Device – EU/US Plug for Indoor Farming

AGc30 Dual Sensor CO₂ Control Device – EU/US Plug for Indoor Farming

1. CO2 controller/tracer

2. Built-in Day / Night Photo-Cell sensor

3. Chart with variable time zoom levels

4. 2-Channel low drift NDIR sensor for more accurate CO2 reading

5. Split-type remote sensor with 4.6-meter long cable

6. Foolproof “Hold Home” function

7. Ready to use no initial setup or calibration needed

8. 3 built-in main parameters (constantly display on screen):

9. Ambient Carbon Dioxide

Set Center value

Set Zone Value

10. MAX /MIN Display

SPECIFICATIONS:

(Typical test conditions, unless otherwise specified: Ambient Temp =23+/-3°C, RH=50%-70%, Altitude=0~100 meter)

CO2 Measurement :

Measurement Range: 0~5000ppm

Accuracy:

• Accuracy at 0~3000ppm: ±50ppm or ±5% of reading, whichever is greater
• Accuracy over 3000ppm: ±7%
• Display Resolution: 1ppm (0-1000); 5ppm (1000-2000); 10ppm (>2000)
• Response Time: <2min for 63% of step change or <4.6min for 90% step change
• Warm-up Time: <30 sec
• Power input: AC 100 ~ 240 VAC
• Operating Temperature: 32~122°F (0~50°C)
• Storage Temperature: -4~140°F (-20~60°C)
• Operating & Storage RH: 0~95%, non-condensing

Dimension:

• Sensor Unit: 153*33*27mm (6.0*1.3*1.1inch)
• Control Unit: 195*145*44mm195 (7.7*5.7*1.7inch)
• Weight: 700g ( 24.7oz)