ANCEL S100/ S200/ S300 Car Smoke Leak Detector

• Hign-concerned Chemical: None
• External Testing Certification: ce
• Brand Name: ANCEL
• Origin: Mainland China

Buy-this-product-on-Aliexpress

Difference of S100, S200, S300:

Here 3 models at this link, please check and choose the one you need.

S100 not with air pump, not pressure gauge, not flowmeter;
S200 built-in air pump, with pressure gauge, not flowmeter;
S300 built-in air pump, with pressure gauge, with flowmeter, with accessories Cap Plugs Kits.

Full System Diagnostics, Don’t Miss Any Leaks.

• Crankcase System Test: excessive pressure or corrosion of the crankcase is the main reason to damage the seal of the crankcase and cause oil leakage.
• Intake System Test: leakage in the air intake system will lead to insufficient intake of the car engine, which will result in scant engine power.
• Car Sealing Test: poor airtightness of the car may lead to a lot of inconvenience like inability to keep warm dusty, not soundproof, and not waterproof , etc.
• Fuel Tank System Test: possible reasons for the leakage of the fuel tank system: 1. There are gaps in the fuel tank and pipeline caused by improper installation. 2. The fuel tank cover is not sealed enough
• Turbo Test: the leakage of coolant would cause the engine to report high water temperature.
• Various Pipe Fittings Test: automobile pipes can be classified according to their functions: brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses.
• EVAP System Test: Leakage of the fuel evaporation system will cause fuel vapor to leak into the atmosphere, causing waste and pollution or unstable engine idling
• Exhaust System Test: Uncleaned harmful gases to be discharged into the atmosphere or increase vehicle noise is the main disadvantage when leaks happened in the exhaust.

Wide Range Of Applications

For detecting the leakage of pipe systems on cars,motorcycles,snowmobiles,off-road vehicles, ATVS,light trucks and speedboats,Suitable for all car models

S100- How To Do Leakage Test?

Step 1: Turn off the power to the car, remove the air filter and throttle connector. Note: If you need to test the EVAP system, you need to manually close the solenoid valve

Step 2: Pour baby oil between the max and min oil volume line, connect the power cord to the 12V car battery, choose the appropriate adapter cone to connect the smoke nozzle and the system.

Step 3: Press the air control switch, wait for 30 seconds, and listen for the squeaking sound to check whether there is a leak in the pipeline or not.

Step 4: Press the smoke control switch, when evident smoke is appearing from the smoke nozzle, reinsert the smoke nozzle into the adapter cone, visible smoke can help you pinpoint the location of the leak.

How to use Ancel s200 / s300?

1. Fill 20ml baby oil to the detector for the first time. Open the engine cover, and hang the detector in the cover.

2. Disconnect the pipe that needs to be connected with detector.

3. Connect detector with DC12V battery, turn on the power switch, and the detector starts to work

4. In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.

Buy-this-product-on-Aliexpress

2 kinds of modes: AIR model+Smoke mode

Air mode :First, use the air mode to directly measure the leak, and judge whether there is a leak by the pressure gauge value. If it is less than 0.5bar, it will inevitably leak. If it reaches 0.8bar and above, the pipeline tightness is very good.Then there is no need to waste baby oil

SMOKE MODE:After the air mode determines that there is a leak, use the smoke mode to find the leak.

How to judge leakage- through the pressure gauge?

NO Leak: When the value of the pressure gauge remains unchanged and the flow meter will read zero (ball at bottom of scale), it means that there is no leakage in the system.

Small Leak: When the value of the pressure gauge drops and the ball in the flow meter slowly fall to the bottom of the scale, it indicates a small leak in the system.

Massive Leak: When the value of the pressure gauge reaches zero and the flow meter ball never falls to the bottom of the scale, it indicates a large leak in the system.

Overheat & Anti-frost Protection

Overheat Protection
When the temperature of the device exceeds 75℃, power protection will be intelligently activated to turn it off.
Anti-frost Protection
The device can also work normally at -20℃.

Buy-this-product-on-Aliexpress

S100 Package list:

1pc * ANCEL S100 Car Smoke Leak Detector Main Unit
1pc * Power Cord
1pc * Hook up
2pc * EVAP Kit
1pc * Smoke Delivery Hose
1pc *Air Adapter

S200 Package list:

1pc * Power Cord
1pc * Delivery Hose
1pc * Funnel
1pc * Intake Bladder
1pc * Service Replacement
1pc * Adapter Cone set
1pc * EVAP Adapter
1pc * EVAP Removal Tool

S300 Package list:

1pc * Power Cord
1pc * Delivery Hose
1pc * Funnel
1pc * Intake Bladder
1pc * Service Replacement
1pc * Adapter Cone set
1pc * EVAP Adapter
1pc * EVAP Removal Tool
1 set * Cap Plugs Kit