MUCAR CDL20 OBD2 Car Diagnostic Tools

Full OBD2 Functions:

*-Read extensive current, pending and permanent codes in OBD system quickly
*-Clear detected fault codes and turn off the Check Engine Light efficiently
*-View graphical live data of vehicle’s computer module(s) for easy analyses
*-View the vehicle’s operating parameters at the moment a DTC is detected
*-Read I/M readiness status to have a vehicle inspected for state emissions compliance
*-Perform O2 sensor test to check fuel efficiency and vehicle emissions
*-Read the results of on-board diagnostic monitoring tests for specific components/systems
*-Retrieve the vehicle information of VIN, CINs, and CVNs completely
*-Perform the component Test by allowing initiating a leak test for the vehicle’s EVAP system

Support Vehicle Coverage:

MUCAR CDL20 is compatible with most American, European, and Asian models manufactured as from 1996.It supports most of OBDII protocols: KWP2000,ISO9141,J1850 VPW,J1850 PWM and CAN (Controller Area Network).If you don’t know your car OBD2 protocols that you could check your car OBD2 connector whether 16 Pin.If yes.This goods support to your car.Please take attention.This goods just check for your car engine.

Support standard obd2 protocol and release year from 1996-now

Such as:

Chrysler,Ford,GM,Jeep,Lincoln,Buick,Cadillac,Chevrolet,Dodge,HM,ect…

2.European Car List:

Support standard obd2 protocol and release year from 2000-now

Mercedes Benz,Smart,Sprinter,BMW,Volkswagen,Skoda,Audi,Opel,Lamborghini,Porsche,Maybach,Ford,Land Rover, Jaguar,Aston Martin,Bentley,Rolls-Royce,Rover,Mini,Vauxhall,DR,Ferrari,Fiat,Abarth,Lancia,Alfa Romeo,Maserati,Bugatti,Citroen,Saab,Volvo,GM,GMSA,Dacia,Seat,ect …

3.Asian Car List:

Support standard obd2 protocol and release year from 2008-now

Japanese cars compatible with JOBD protocol are not supported

Reset Check Engine Light

MUCAR CDL20 enables you to clear the engine warning light, after completing the full obd2 diagnostics with ease. The main purpose of this tool is to:
*Scan the engine systems;
*Tell you about the nature of the issue;
*Give an accurate reason why the engine check light is on;
*Help to detect any potential problems;
*Avoid excessive costs for unnecessary repairs.
*The warning light does not turn off till you fix the issue.

Pass Emission Test Smoothly

With this scan tool, you don’t have to drive around endlessly, continuously coming back to the repair shop for the retest.
You can do a quick check of the v=ehicle, to determine if it is ready to pass the emission test.

DTC Lookup Support

Get DTC’s definition in no time with the DTC Lookup function. Never waste time on Google or taking your dictionary out when you want to know the meaning of any DTC. For vehicle compatibility, feel free to go for customer service. You’ll get a satisfactory reply in a short time.

Buy-this-product-on-Aliexpress

Pass Emission Test Smoothly

With this scan tool, you don’t have to drive around endlessly, continuously coming back to the repair shop for the retest.

You can do a quick check of the vehicle, to determine if it is ready to pass the emission test.

I/M Readiness

Check the readiness of the monitoring system. It is an excellent function to use prior to having a vehicle inspected for compliance to a state emissions program.

O2 Sensor Test

Retrieve O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

On-Board Monitor

View the results of On-Board Monitor tests. The tests are useful after servicing or after erasing a vehicle’s control module memory.

Get Effective Diagnostic Result

Your repair work can be done in a short time by using THINKOBD as follows

Vehicle Information

Display the vehicle identification number (VIN), the calibration identification (CIN), and the calibration verification number (CVN), and other information of the test vehicle.

EVAP Test

Mode $08 command tells your car to start a test of the “evaporative emission control system”, to prevent fuel from evaporating out of your tank and contributing to smog.

By this way, you can verify your fix right away, without waiting a few days (or longer) for your car to run it automatically.

Freeze Frame Data

Snapshot the precise conditions of the car when a fault code triggers the check engine light, to help identify the problem.

Live Data Stream

Display the real time PID data from ECU (as analog inputs and outputs, digital inputs and outputs, and system status information broadcast on the vehicle data stream)

The live data produced is accurate and tells you exactly what you require to know about your vehicle.

Other User-Friendly Features

1.Plug & Play

You just need to connect the diagnostic cable into the vehicle’s DLC socket, and the code reader gets the power directly from the vehicle.

2.Easy-to-use Keypad

The reader has 4 button keypad buttons that make the menu super easy to scroll.

MUCAR CDL20 users can operate up and down, press OK or use the enter button pretty easily, with a solid and effective touch to their delight.

3.Compact Design

The reader has a compact ergonomic design which makes it fit in the palm quite comfortably, especially made for people who don’t want bulky devices.

PACKAGE LIST:

1*Main Unit
1*Quick Start Guide