VEVOR CW-5200/ DZ5200LS-QX Industrial Water Cooler Chiller

• Cooling water must be kept empty when cooling machine has been not in use for long or in transport.
• It is strictly forbidden to plug and run the cooler without feeding water.
• Cooler should be placed in a well-ventilated, dry environment away from heat sources. Please keep at least 30cm from obstructions to the air outlet which is in the back of the cooler, and leave at least 10cm between obstructions and air inlets of two sides.
• To protect laser tubes , the radiator fan of cooler will suspend to work when water temperature is too low , and it will restart to run when water temperature rises back to accceptable range.
• To ensure good heat dissipating, please open the lid to clean the dirt regularly.
• Working in cold north area, it is better to use noncorrosive antifreeze fluid.

6L Cooling Tank Capacity

The water cooler chiller features a stable performance with a 6L large-capacity cooling box. Equipped with a precision scale, you can fill with water according to the scale.

Dual Cooling Fans

Professional forced air-cooled radiators inside quickly takes away the heat. High heat dissipating capacity decides that the water cooler chiller is not easy to be blocked.
What’s more, for EU CW-5200 Pro version we use the standard R-407C as refrigerant to make sure the laser cutting and engraving machines work smoothly during use.

Precise Thermostat

This CNC machine industrial chiller equips an accurate temperature controller. You can adjust and monitor the real-time temperature accurately to ensure the working status of the machine.

Multiple Alarm Functions

This laser engraver water chiller has various protection, and early warning functions water flow alarm protection, high/low temperature alarm, compressor delay protection as well as compressor over-current protection. These measures can protect the machine from overheating and extend its service life.

User-friendly Handle

Rubber handles are super durable and reliable. The ergonomic design makes it very comfortable to hold, saving time and effort as well as improving the working efficiency.

Wide Application

DZ5200LS-QX Series is a professional cooling machine, easy to install and operate, compact, and easily movable. It is designed for cooling the one CO2 glass laser tube under 130W/150W of the laser engraving and cutting machine.

• Product Parameter: The DZ5200LS-QX industrial water cooler chiller is 6L capacity, 12/16 L/max.flow, Precision: ±32.54℉/0.3℃, Cooling capacity: 800W/1400W, 110V(US)/220V(EU) Voltage, and 60/50Hz Frequency.
• Efficient Cooling Fan: The water cooler chiller has two professional forced air-cooled radiators, high heat dissipating capacity, and not easy to be blocked. High-speed fans inside quickly take away the heat. And the DZ5200LS-QX’s water inlet and outlet ports are made of anti-corrosive brass to keep from any leakage problems and extend long service life.
• Constant & Intelligent Temperature Mode: DZ5200LS-QX series industrial chiller can be used to cool high-power lasers. Two working temperature modes are constant temperature and intelligent temperature adjustment. The smart temperature control mode can be adjusted to the corresponding water temperature as the temperature changes, and the water temperature can be automatically adjusted according to the season.
• Various Alarm Functions: This professional industrial chiller has multiple warning protection mechanisms such as water flow alarm protection, high/low temperature alarm, compressor delay protection as well as compressor over-current protection.
• Multiple Application: DZ5200LS-QX Series professional industrial water cooler machine is suitable for small water-cooled cooling devices requested machinery. The Industrial Water Chiller has a patent Certificate, CE, and ROHS Certificate. It is designed for cooling the one CO2 glass laser tube under 130W/150W of the laser engraving and cutting machine. Emitting rate higher than 60%.

Installation steps

       A. Open the package to check if the machine is intact and all the necessary accessories are completed.

       B. Open the injection port to feed cooling water.

          Observe water level gauge while adding water slowly, be careful not to have water overflowed! For the cooling of carbon steel equipment, water should be added with an appropriate amount of anti-corrosion agentia. Working in cold north area, it’s better to use noncorrosive antifreeze fluid.

      C. According to system conditions, please well connect water inlet and outlet pipe.

      D. Plug in, turn on the power switch. (Do not start up without water in the tank!)

          (1) Circulation pump of the chiller starts working. Operating for the first time may produce bubbles in the pipe, which occasionally leads to flow alarming. In such case, it will go back to normal after running for a few minutes.

          (2) After the first boot, please immediately check whether the water pipe leaks.

        (3) Power switched on, if the water temperature is below the set figure, it is normal that fans and other components of the machine do not work. The temperature controller will automatically control the working conditions of the compressor, magnetic valve, fans and other parts based on the set controlling parameters.

         (4) As it takes a longer time to start the compressor and other components, the time you take might range from seconds to minutes, please do not turn the power off and on again frequently.

     E. Check the water level in the water tank.

          The first startup of the new chiller empties the air in the water pipe, leading slightly water level decline. In order to keep the water level in the green area, it’s allowed to replenish adequate water. Please observe and record the current water level and inspect it again after the chiller has been running for a period of time, if the water level drops obviously, please re-inspect the water pipeline leakage.

     F. Adjust parameters of temperature controller.

        CW-5200 series use an intelligent thermostat. Normally users do not need to adjust it. If it’s really necessary, please refer to “Operating status and parameters adjustment.

Buy-this-product-on-Aliexpress